This Top Load Washer Water Inlet Valve is located at the rear of the appliance and allows hot and cold water to fill in the washer during the cleaning cycle. If your washer isn’t getting any cold or hot water, one of the solenoids in the appliance’s current valve may have failed. This part may also be needed if you find that your washer is filling slowly, not filling at all or leaking cold or hot water onto the floor. Replacing this part will require basic hand tools, some disassembly of the washing machine and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off your hot and cold water supplies. Recommended Item: Consider replacing the Fill Hose (item 8212487RP) at the same time as this repair. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine’s drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Related Products MTW5605TQ0 1CWTW5590ST0 MTW5621TQ1 NTW5505TQ0 MTW5620TQ1 ATW4471TQ0 2DMTW5705TW1 MTW5620TQ0 MTW5600TQ1 HTW4400TQ0 7MMPL6000TW0 MTW5640TQ1 1CWTW5790SQ0 RTW4400TQ0 NTW5640TQ0 MTW5600TQ0 WTW5500ST0 ETW4400TQ0 WTW5500SQ0 MTW5621TQ0 NTW5500TQ0 MTW5670TQ0 CAWS954SB0 7MMPD6845TM0 CAWS954SQ0 MTW5640TQ0 2DMTW5705TW0 WTW5790ST0 1CWTW5590SQ0 1CWTW5500SQ0 WTW5590SQ0 WTW5790SQ0 WTW5590ST0 1CWTW5500ST0 1CWTW5790ST0